There are many types of LED industrial and mining lamps. In dusty environments, closed lamps or convection lamps with upward luminous flux should be used; in humid environments, attention should be paid to the airtightness of the enclosure and the surface treatment of the reflector; Generally, indoor LED industrial and mining lamps are usually open lamps, which use enamel surface reflectors, thick aluminum oxide film on the surface or aluminum reflectors coated with silica protective film; considering that it cannot be avoided in the production site For the vibration, the fixed light source can be used with anti-loosening lamp holders and so on.
The paint and glaze treatment of LED high bay lights will make it appear white, and reflectors made of aluminum, glass mirrors, prism glass and other materials can obtain a wide light distribution, which is suitable for large areas and vertical working surfaces. Or in a nearly vertical workplace.
For those tall workshops and places with tall machine tools that require separate lighting, reflectors made of materials with strong light control properties such as prism glass, mirror glass, and polished aluminum can be used to obtain a narrow beam distribution.
LED high bay lights can work long-term and reliably in places with relatively poor environmental conditions such as dust and humidity. LED high bay lights have special requirements in terms of structural design, housing and reflectors. In dusty environments, closed lamps or convection lamps with upward luminous flux should be used; in humid environments, attention should also be paid to the airtightness of the enclosure and the surface treatment of the reflector; generally, open lamps are commonly used indoors. The enamel surface reflector, the aluminum reflector with a thick aluminum oxide film on the surface, or an aluminum reflector coated with a silica protective film is used; considering the inevitable vibration in the production site, the fixed light source can be used with an anti-loosing lamp holder and many more. There are many ways to fix led high bay lights. General lighting has the form of ceiling, embedded, hoisting (fixed by straight pipe or chain) and wall suction. Movable local illuminators are equipped with corresponding hooks, handles, clamp feet, etc.; fixed local illuminators generally use screws or fixing mechanisms to securely lock on the working machine.
There are many types of LED industrial and mining lamps. In dusty environments, closed lamps or convection lamps with upward luminous flux should be used; in humid environments, attention should be paid to the airtightness of the enclosure and the surface treatment of the reflector; Generally, indoor LED industrial and mining lamps are usually open lamps, which use enamel surface reflectors, thick aluminum oxide film on the surface or aluminum reflectors coated with silica protective film; considering that it cannot be avoided in the production site For the vibration, the fixed light source can be used with anti-loosening lamp holders and so on.
The paint and glaze treatment of LED high bay lights will make it appear white, and reflectors made of aluminum, glass mirrors, prism glass and other materials can obtain a wide light distribution, which is suitable for large areas and vertical working surfaces. Or in a nearly vertical workplace.
For those tall workshops and places with tall machine tools that require separate lighting, reflectors made of materials with strong light control properties such as prism glass, mirror glass, and polished aluminum can be used to obtain a narrow beam distribution.
LED high bay lights can work long-term and reliably in places with relatively poor environmental conditions such as dust and humidity. LED high bay lights have special requirements in terms of structural design, housing and reflectors. In dusty environments, closed lamps or convection lamps with upward luminous flux should be used; in humid environments, attention should also be paid to the airtightness of the enclosure and the surface treatment of the reflector; generally, open lamps are commonly used indoors. The enamel surface reflector, the aluminum reflector with a thick aluminum oxide film on the surface, or an aluminum reflector coated with a silica protective film is used; considering the inevitable vibration in the production site, the fixed light source can be used with an anti-loosing lamp holder and many more. There are many ways to fix led high bay lights. General lighting has the form of ceiling, embedded, hoisting (fixed by straight pipe or chain) and wall suction. Movable local illuminators are equipped with corresponding hooks, handles, clamp feet, etc.; fixed local illuminators generally use screws or fixing mechanisms to securely lock on the working machine.